| Direction of travel |
Tilt, two axis |
| Travel |
Upper axis +/-15°, lower axis +/-10° |
| Table size |
125 mm x 125 mm |
| Motor |
Equivalent to PK545NBW (5-wire type pentagonal connection 0.75A/phase) |
| Resolution |
0.002° |
| Transfer mechanism |
Worm gear mechanism |
| Guiding method |
V-groove and Cross roller |
| Positioning accuracy |
0.025° |
| Repeatability |
+/-0.002° |
| Stage height |
95 mm |
| Center of rotation |
112 mm |
| Positioning accuracy of rotatation center |
- |
| Lost motion |
0.002° |
| Moment rigidity |
0.16sec/N*cm (Yaw) |
| Load capacity |
78.4 N (8 kgf) |
| Weight |
5.4 kg |
| Maximum speed |
10°/s |
| Material / Surface treatment |
Aluminum alloy / White Alumite |
| HOME sensor |
Normally open contact (make contact, A contact) operation, Photo sensor
*non-adjustable |
| Pre-HOME sensor |
Normally closed contact (Break contact, B contact) operation, Photo sensor
*adjustable range : Upper axis +/-15°, lower axis +/-10° |
| LIMIT sensor |
Normally closed contact (Break contact, B contact) operation, Photo sensor
*adjustable range : Upper axis +/-15°, lower axis +/-10° |
| Compatible cable |
0.75-A type (ACB-STD2, ACB-STD3, ACB-STD-D3, ARC-STD2, ARC-STD-D2, ARC-STD3 or ARC-STD-D3, be sold separately) |
| Standard accessories |
Inspection certificate
Mounting screw : M4 Hexagon socket head cap screws (4 pcs) |
| Supplemental note |
*Dedicated parameter setting for QT-A (Parameter No.4): 14 |