Controllers

QT-ADM3

3
3 axis controller driver
Estimate separately
Number of controlled axes 3 axis
Type Controller body
YESRoHS対応状況

Product documentation

Description

3-axis controller driver AC90 ~ 240V 50/60Hz Power supply voltage (phase 0.75A /).
Jog operation by QT-AK3 box, step movement, teaching behavior, such as one-touch speed switching is possible.
Storing a program created by the application of dedicated software supplied as standard, automatic operation of a single controller.
To the liquid crystal display operation unit box (mm, μm, etc. Simple display decimal degree symbol, the minutes and seconds time) is possible.
As an interface for PC, equipped with a standard (LAN) RS-232C, Ethernet.
In conjunction with (sold separately), general-purpose input and output by the input and output various signals, the driving pulse output output / stop move, any step pulse output, built-CH program selection input, pulse input drive, such as input, start moving QT-AT connection with other devices is possible.
(Only between the axes AB) can be controlled independently for each axis, linear interpolation between the two axes move.
The drive is equipped with a standard feature from the S-shaped acceleration and deceleration smooth trapezoidal drive is possible.
Equipped with an electromagnetic brake control function. Electromagnetic brake control is possible by combination of (sold separately) QT-BK.

Specifications

Number of controlled axes 3 axis
Type Controller body
Input power supply AC90~240V 50/60Hz
Ambient Temperature and humidity 10~40℃/20~80%(non-condensing)
Outside dimension W165×D300×H100mm(Excluding protrusions)
Weight 4.0㎏
Cable length Power cable approx2m
Applicable models CHUO's Motorized stages (0.75A/phase model)
Supplemental note *CHUO's Motorized stage dedicated parameter setting is here (ZIP file download, written by Japanese).
*QT-A LAN setting guide is here (PDF download, written by Japanese).
*0.75A/phase models can be used (QT-BK is required for Z stage with electromagnetic brake, QT-BK is sold separately).

Connection method - Cable, Controller and Driver -

Specification