Not Found

B30109A1

1
BIXY Stage FFP System(OL)A1
Estimate separately
Correspondence microscopes OLYMPUS IX70, IX51, IX71, IX81, IX81+ZDC, IX73, IX83, IX83-ZDC, BX51WI

Product documentation

Description

As projection of XY stage top was lost, and was made full flat, it was inexpensively use also than conventional automatic stage.
It is possible that XY stage of microscope is moved in automatics.
The attached controller and actuator, and manual operation possible jog movement, step movement to move a certain amount is set as possible, and that can be moved to set any coordinate teaching operation, such as is possible.
In application that is doing free distribution in web site, any operation is programmable relatively easily.
How to moved, or identify display unit, and is clearly displayed on the LCD screen, and operator's grasping is possible.
As response for imaging software, too, those of hold has that can be enabled software use also conveniently.
"MDJ-made Meta series software (MetaMorph etc.) correspondence ", "mitani trading-made bio-imaging software LuminaVision correspondence ".
As the standard response on K standards holder, each companies incubator and thermo plate is load available, too.
"LCI-made Chamlide IC, TC, WP series ", "Tokai hit-made Stage Top Incubator, Thermo Plate series"etc.
Load available the OLYMPUS-made inverted microscope, some upright microscope(stage fix type microscope).

Specifications

Direction of travel XY axis : two direction
Control method Open loop
Travel X axis:±60mm, Y axis:±50mm
Feed screw lead 1mm
Resolution Full step(1/1):2μm(Mechanical) Micro step(1/250):8m(with B30219 Driver controller)
Repeatability within 0.7μm
Maximum speed 50mm/s(25,000pps)
Material Aluminum alloy,4.6kg
Correspondence microscopes OLYMPUS IX70, IX51, IX71, IX81, IX81+ZDC, IX73, IX83, IX83-ZDC, BX51WI

Specification Table

System Configuration Table

Controller

Accessories

System Macthing Table

Supplementation

Catalog Request

Catalog