| Display resolution |
1pW (display in W), 0.01dB (display in dBm), LCD with 3 levelbacklight, wavelength display: 4 digits, power display: 4 1/2 digits (unit: mW, μW, nW, dBm, dBr) |
| Range switching |
8 range, auto, manual and remote |
| Sampling rate |
5 reads/sec or more |
| Wavelength sensitivity collection |
Automatic correction of sensor wavelength sensitivity by wavelength setting (in 1 nm step) |
| Smoothing function |
Moving average 2 to 100 times |
| Max value hold function |
Holds the maximum measured value |
| Offset zero |
Sensor offset stored in the memory for automatic correction |
| Analog output |
Analog output according to the input signal, 0 to 2V optput resistance 10Ω or less, output connector: 2P mini-jack (dia. 3.5mm) |
| USB interface |
USB 2.0 full-speed compliant (connector mini B/female) |
| Ambient temperature/humidity |
0 to 40℃, 80%RH (no condensation) |
| Warm-up time |
30 minutes or more |
| Power supply |
AC100 to 120V 5VA or less, DC input 9V 100mA or less, AA battery X4, (service life 60hours, according to condition) |
| Outside dimension |
Approx. W80 X H180 X D40 |
| Weight |
Approx. 0.3kg (without AA batteries) |